Most RecentWhy does the calculated VCO frequency of TX FGT PLL fractional mode in the IP Catalog GUI mismatch with the VCO frequency formula in the F-Tile Architecture and PMA and FEC Direct PHY IP User Guide?Why do I see a fitter error(21843) when bypassing RX auto adaptation for FGT channels by qsf assignments?What are the valid bits of the reconfiguration address bus to specify the selected channel when enabling the "Share reconfiguration Interface" option for the Transceiver Native PHY Arria® 10 FPGA/Cyclone® 10 GX FPGA IPHow do I enable the electrical idle feature in the E-Tile Transceiver Native PHY Agilex® 7 FPGA IP?Why does rx_ready[i](i>0) of F-tile PMA/FEC Direct PHY FPGA IP tie to 0 when the number of PMA lanes is set to more than one and enabled per PMA lanes TX and RX ready signal?Why does the "Update Memory Initialization File" operation fail for an on-chip memory under a Platform Designer system?Why does releasing i_rx_rst_n cause the link partner's PCS to unlock with F-Tile Ethernet Hard IP?Why is the o_rx_pfc signal asserted incorrectly when using the F-Tile Ethernet Hard IP in 400GE mode?Why does the avst_source_u_data data interface overflow when using Block floating-point (BFP) compression with the O-RAN FPGA IP?Why does the second AN/LT port fail in the Ethernet Toolkit when using the F-Tile Ethernet Hard IP in the Quartus® Prime Pro Edition Software version 24.3.1?
