Opencl complie Error: Evaluation of Tcl script import_compile.tcl unsuccessful

--- Quote Start ---

Thank you for the quick reply. The board I'm using is Gidel Proc10A X115 which has an Arria 10 FPGA on. The BSP is the most update to date one which supports the Quartus Prime version 16.0.2, which matches the Quartus version I'm using.

--- Quote End ---

Does this issue happen with all of your kernels or just some? If it happens with all, you should probably contact Gidel since there might be some issue with their BSP. If it is just some kernels, can you also post the kernel compilation log if it exists? It is named *kernel_name*.log?

--- Quote Start ---

Does this issue happen with all of your kernels or just some? If it happens with all, you should probably contact Gidel since there might be some issue with their BSP. If it is just some kernels, can you also post the kernel compilation log if it exists? It is named *kernel_name*.log?

--- Quote End ---

I checked the "kernel_name".log file, but couldn't find any error message.

I actually solved the problem but deleting the previously generated Quartus project. It seems that a previous build error existed in the generated Quartus project failed all of my later complies.

--- Quote Start ---

Attach the log as a file, you don't have to copy/paste it into the thread (use the "Advanced" reply mode). The actual error is somewhere else and you have to provide all of the file so that we can find it.

Also what message do you get when you run "quartus_map --version"? Maybe quartus_map is not in your PATH and that is why it doesn't work? You should either add it to your PATH or use the full path to the binary.

Don't forget to provide the AOC version and your board BSP version.

--- Quote End ---

AOC version： 16.0.2

Quartus: 16.0

board BSP version: 1.0

Thanks!

Your compilation log looks very strange, there are lots of warning in it that I have never seen before, especially the parts that complain about some files having been edited in Quartus 15.0. Have you tried completely removing the OpenCL project folder as yangchen4623 suggested and then running your AOC command?

Also please mention your board name. Your BSP version should be something that matches some version of Quartus (like 14.0/15.0/16.0, etc). You might be using a BSP that is not compatible with the version of Quartus/AOC you are using.

--- Quote Start ---

Your compilation log looks very strange, there are lots of warning in it that I have never seen before, especially the parts that complain about some files having been edited in Quartus 15.0. Have you tried completely removing the OpenCL project folder as yangchen4623 suggested and then running your AOC command?

Also please mention your board name. Your BSP version should be something that matches some version of Quartus (like 14.0/15.0/16.0, etc). You might be using a BSP that is not compatible with the version of Quartus/AOC you are using.

--- Quote End ---

Before I complie my opencl kernel, I ofen remove directory "./bin".

The board is Xeon+FPGA MCP, FPGA为GX1150.

Most of the time, complie result is rights.

If I complie several kernels concurrently, will they affect to each other?

Well, that changes everything. The Xeon+FPGA platform works in a completely different manner and all info and documentation about it is only available to the limited number of people who have access to the systems. Since those systems are largely a work-in-progress, I would expect a lot of bugs.

I am afraid your log isn't saying much, it is just breaking in some part of the process without much useful ino. Intel/Altera probably has a specific support for these systems. I strongly suggest contacting them directly, they might have a new BSP or something that might fix your problem.

Also regarding parallel compilation, since the compilation process is very memory-intensive, performing multiple compilations in parallel would need a very large amount of memory and if your system runs out of memory, one or more of the compilations will crash. Expect to need at least 40 GB of memory per compilation for Arria 10. Still, in such cases, there is always a message in the log that says the crash has happened due to lack of memory, while such error does not exist in your log. If the compilation of the same kernel always crashes in the same place with the same error, then this is some issue in the software, but if the crashes are random, this could very well be due to lack of resources due to parallel compilation or some other transient issue.

--- Quote Start ---

Well, that changes everything. The Xeon+FPGA platform works in a completely different manner and all info and documentation about it is only available to the limited number of people who have access to the systems. Since those systems are largely a work-in-progress, I would expect a lot of bugs.

I am afraid your log isn't saying much, it is just breaking in some part of the process without much useful ino. Intel/Altera probably has a specific support for these systems. I strongly suggest contacting them directly, they might have a new BSP or something that might fix your problem.

Also regarding parallel compilation, since the compilation process is very memory-intensive, performing multiple compilations in parallel would need a very large amount of memory and if your system runs out of memory, one or more of the compilations will crash. Expect to need at least 40 GB of memory per compilation for Arria 10. Still, in such cases, there is always a message in the log that says the crash has happened due to lack of memory, while such error does not exist in your log. If the compilation of the same kernel always crashes in the same place with the same error, then this is some issue in the software, but if the crashes are random, this could very well be due to lack of resources due to parallel compilation or some other transient issue.

--- Quote End ---

Ok, thanks for your reply!

Hello,

well, I have the same problem,

please, can someone help me?

aoc --version

Altera SDK for OpenCL, 64-Bit Offline Compiler

Version 16.0.2 Build 222

Copyright (C) 2016 Altera Corporation

quartus_map --version

Quartus Prime Analysis & Synthesis

Version 16.0.2 Build 222 07/20/2016 SJ Pro Edition

Copyright (C) 1991-2016 Altera Corporation. All rights reserved.

aoc --list-boards

Board list:

alaric_v2_es_hpc

Error: Compile Error, no able to genertae hardware

in quartus_sh_compile.log

Info: Using INI file ........./helloWorld/hello_world/bin/hello_world/quartus.ini

Error (23031): Evaluation of Tcl script import_compile.tcl unsuccessful

Error: Quartus Prime Compiler Database Interface was unsuccessful. 1 error, 0 warnings

Error: Peak virtual memory: 1433 megabytes

Error: Processing ended: Mon Jul 10 23:25:12 2017

Error: Elapsed time: 00:18:09

Error: Total CPU time (on all processors): 00:25:02