Operating system kernel-level FPGA bridge communication
We are using a custom (Agilex 5) platform and need to access the FPGA bridges from the Linux kernel. We are unable to locate the corresponding device tree nodes or modifications required to access these memory-mapped regions. We're aware of the devmem2 package, but we want to access the FPGA from the kernel side without relying on it. Please guide us on how to configure the device tree and use kernel-level commands or interfaces to access the HPS-to-FPGA and Lightweight HPS-to-FPGA bridges. configuration from Linux. CONFIG_OF_RESOLVE y CONFIG_OF_OVERLAY y CONFIG_OF_CONFIGFS y CONFIG_FPGA_MGR_STRATIX10_SOC y CONFIG_FPGA_BRIDGE y CONFIG_FPGA_REGION y CONFIG_OF_FPGA_REGION y CONFIG_OVERLAY_FS yValidating ECC Functionality on Custom Agilex 5 SOM in Linux Kernel
We are now looking to validate ECC (Error Correction Code) functionality on our custom Agilex 5 System-on-Module (SOM) running Linux. Our objective is to ensure that ECC is correctly enabled and functioning across all relevant memory regions, and that error detection and correction mechanisms are properly integrated at the kernel level. Could you please provide guidance on the necessary kernel configurations, device tree modifications, and available tools or procedures to test and monitor ECC behavior on this platform? Any documentation or reference designs specific to Agilex 5 ECC support would be highly valuable.
Cyclone V HPS FPGA2SDRAM Clock Queries
Dear Intel and all, Having some very puzzling behavior on HPS SDRAM and FPGA fabric bridge. If a fast clock i.e. 148MHz is running on 128bit AXI3 aka f2h_sdram0 mostly read action. And another AXI3 is using the remain 128bit bus with 144MHz aka f2h_sdram1 mostly on write. As such the system will stuck on distro aka Linux. With all these background could engineer or internal stuffs help. What is the restriction or constraints to use these bus under safe and stable speed? Forgot to provide stable situation: If the write dominated bus is reduced to 100MHz then the system is stable and no stall is found. So this makes a very strong feeling that the write cache is having issue? maybe CMA insufficient? Brian