Forum Discussion
qwitza
Occasional Contributor
Occasional ContributorSDRAM calibration failed.
Hello, after Enpirion stopped selling some of the parts we used on our board, we had to redesign it. We assembled ten boards, and on two of them, I’m now getting an SDRAM calibration error in U-Boot...
qwitzaOccasional Contributor
Occasional ContributorHello,
now i am an step further.
my steps:
- #define LOG_DEBUG in sdram_gen5.c
- #define DLEVEL 1 in sequencer.c
now i get an error result. see my next post.
