New Contributor
New ContributorI will show you how it looks in our device manager, task manager, and services panel. It's just the default executable included with the Quartus installation. We installed everything normally, including installing the JTAG drivers when prompted to by the main installer, and we haven't done anything involving windows services.
The VID/PID does indeed show up differently when it is showing as "Usb blaster variant" vs "Usb-BlasterII", specifically the "REV". And again, you can hear the windows device connect noise and see the device manage refresh when reopen Quartus Programmer after killing jtagserver.exe
While not working:
Altera USB-Blaster II (JTAG interface)
USB\VID_09FB&PID_6010&REV_0127&MI_00
USB\VID_09FB&PID_6010&MI_00
Altera USB_Blaster II (System Console interface)
USB\VID_09FB&PID_6010&REV_0127&MI_01
USB\VID_09FB&PID_6010&MI_01
While working:
Altera USB-Blaster II (JTAG interface)
USB\VID_09FB&PID_6010&REV_0142&MI_00
USB\VID_09FB&PID_6010&MI_00
Altera USB_Blaster II (System Console interface)
USB\VID_09FB&PID_6010&REV_0142&MI_01
USB\VID_09FB&PID_6010&MI_01
Device Manager:
Windows Process:
Service:
Regular ContributorAs we haven't received a response to our previous notification, this thread will be transitioned to community support. We hope all your concerns have been addressed. If you have any new questions, please feel free to open a new thread to receive support from Altera experts. Otherwise, community users will continue to assist you here. Thank you.
