Forum Discussion

dpcsu_e's avatar
dpcsu_e
Icon for New Contributor rankNew Contributor
4 days ago
Solved

Agilex3 dcio parsing issue with RSU

Dear support, I am facing with the following issue: Environment: Quartus prime pro 26.1.0 build 110 (03/26/2026) on windows 11 Target board: Agilex3C evaluation kit (non-hps) Cosigned SDM + Authe...
Compilation
general
Platform
  • dpcsu_e's avatar
    dpcsu_e
    1 day ago

    Update2:After disabling in the .pfg file the factory fallback:

    <partition reserved="1" fixed_s_addr="1" s_addr="0x00000000" factory_fallback="0" e_addr="0x0020FFFF" fixed_e_addr="1" id="BOOT_INFO" size="0"/>

    the issue did not happen anymore --> confirming the issue in 351710 still exists with Quartus 26.1

dpcsu_e's avatar
dpcsu_e
Icon for New Contributor rankNew Contributor
4 days ago

The failing address is within the BOOT section:

BLOCK START ADDRESS END ADDRESS

 

BOOT_INFO 0x00000000 0x0020FFFF

FACTORY_IMAGE 0x00210000 0x0035FFFF (0x0031FFFF)

SPT0 0x00360000 0x00367FFF

SPT1 0x00368000 0x0036FFFF

CPB0 0x00370000 0x00377FFF

CPB1 0x00378000 0x0037FFFF

P1 0x00380000 0x0048FFFF

P2 0x00490000 0x0059FFFF

 

 

Configuration device: A3CY135BM16A

Configuration mode: Active Serial x4

 

 

Notes:

 

- Data checksum for this conversion is 0xDA1340C2

 

- All the addresses in this file are byte addresses