Update nios-linux 20100621 buid error

Got same error when starting to play around with uclinux some time ago.

Hope I remember right when I tell you to check

a) your branches

b) your toolchain

So when working without mmu you should use nios2gcc-20080203.tar.bz2 and test-nios2 branches,

when working with mmu you should use toolchain-mmu and branches trunk (uClinux-dist) / nios2 (linux-2.6)

Hope this helps.

Andi

I'm sure to use nios2gcc-20080203.tar.bz2 and test-nios2 branches (uClinux-dist & linux-2.6)

and i make succesfull but not detected USB 1-0 : 1 port detected ,so i try to update and get above error

can you see my post and help me

http://www.alteraforum.com/forum/showthread.php?t=34708

--- Quote Start ---

After update nios-linux 20100621, when i make, get error :

{standard input}: Assembler messages:

{standard input}:365: Error: unrecognised instruction initda

make[3]: *** [arch/nios2/mm/memory.o] Error 1

make[2]: *** [arch/nios2/mm] Error 2

make[1]: *** [sub-make] Error 2

make[1]: Leaving directory `/root/nios2-linux/linux-2.6'

make: *** [linux] Error 1

---------------------------------------------------------------------------------------------

Hallo kinhcan89,

can u tell me how did you solve this Problem? i am having the same one! i Know its one year ago but maybe u remember :-).

--- Quote Start ---

--- Quote Start ---

After update nios-linux 20100621, when i make, get error :

{standard input}: Assembler messages:

{standard input}:365: Error: unrecognised instruction initda

make[3]: *** [arch/nios2/mm/memory.o] Error 1

make[2]: *** [arch/nios2/mm] Error 2

make[1]: *** [sub-make] Error 2

make[1]: Leaving directory `/root/nios2-linux/linux-2.6'

make: *** [linux] Error 1

---------------------------------------------------------------------------------------------

Hallo kinhcan89,

can u tell me how did you solve this Problem? i am having the same one! i Know its one year ago but maybe u remember :-).

--- Quote End ---

Which toolchain do you use and which branch do you use (mmu / nommu)?

--- Quote Start ---

--- Quote Start ---

Which toolchain do you use and which branch do you use (mmu / nommu)?

--- Quote End ---

I am using pre-build toolchain nios2gcc-20080203.tar.bz2 and test-nios2 branches(uClinux-dist and Linux-2.6).

--- Quote Start ---

--- Quote Start ---

I am using pre-build toolchain nios2gcc-20080203.tar.bz2 and test-nios2 branches(uClinux-dist and Linux-2.6).

--- Quote End ---

I can remember that this was the wrong toolchain for systems with mmu. nios2gcc-20080202 prebuilt toolchain was for use with nommu-systems. The error message you posted looks like this is the problem here, too.

--- Quote Start ---

--- Quote Start ---

I can remember that this was the wrong toolchain for systems with mmu. nios2gcc-20080202 prebuilt toolchain was for use with nommu-systems. The error message you posted looks like this is the problem here, too.

--- Quote End ---

My Hardware Architect don't have on chip memory, I am using nommu system.

Maybe you should build the tool chain like:

cd nios2-linux/toolchain-build

git clean -f -x -d# clean on restart

make gcc

make elf2flt

Then,use the new compiler you made.

PATH=$PATH:/home/(user name)/nios2-linux/toolchain-build/build/nios2/bin

Regards.