hello i do a clock to 24 hours in vhdl. i am using cyclone 2. I do vhdl files, test them with model sim, after that the comipations goes on with warnings, but it do not work on the fpga ? why ? i can not understand please help

Post some code and we can have a look. From what you say, I can only guess that you have use a bad coding style, but without seeing the code I cant say any more.

library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; use ieee.std_logic_unsigned.all; entity counter_devidor is port ( CLK, RST :in std_logic; devided_clk : inout std_logic -- Q :out std_logic_vector(24 downto 0) ) ; end counter_devidor; architecture beh of counter_devidor is signal QL : std_logic_vector (24 downto 0); begin process(CLK, RST) begin if (RST = '1') then QL <= "1011111010111100001000000"; devided_clk <= '0'; elsif (CLK'event and CLK = '1') then if (QL = "0000000000000000000000000") then QL <= "1011111010111100001000000"; devided_clk <= not(devided_clk); else QL <= QL - 1; end if; end if; end process; --Q <= QL; end beh; library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; use ieee.std_logic_unsigned.all; entity counter60seconds is port ( clk, reset: in std_logic; seconds60 : inout std_logic ); end counter60seconds; architecture beh of counter60seconds is signal cnt : std_logic_vector (5 downto 0); --signal sec_sign : std_logic; begin process (clk, reset ) begin if (reset = '1') then cnt <= "111100" ; seconds60 <= '0' ; else if (clk'event and clk = '1') then if (reset /= '1') then if (cnt = "000001") then seconds60 <= not(seconds60); cnt <= "011110"; else cnt <= cnt - 1 ; end if; end if ; end if; end if ; end process; end beh; library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; use ieee.std_logic_unsigned.all; entity counter_10_min is port ( CLK, RST :in std_logic; devided_clk_10_sec : inout std_logic; Q_10_min :out std_logic_vector(3 downto 0); numbers_min10 :inout std_logic_vector(3 downto 0); flagFirst : inout std_logic ) ; end counter_10_min; architecture beh of counter_10_min is signal QL : std_logic_vector (3 downto 0); --signal numbers_sec10_sign : std_logic_vector (3 downto 0); begin process(CLK, RST) begin if (RST = '1') then QL <= "1010"; flagFirst <= '0'; -- numbers_sec10 <= "0000"; devided_clk_10_sec <= '0'; elsif (CLK'event and CLK = '1') then if (QL = "0001") then QL <= "0101"; devided_clk_10_sec <= not(devided_clk_10_sec); flagFirst <= '1'; else QL <= QL - 1; end if; end if; end process; --process(CLK, RST, devided_clk_10_sec) begin -- if (RST = '1') then -- numbers_sec10_sign <= "0000"; --elsif (devided_clk_10_sec'event and devided_clk_10_sec='1' ) then --numbers_sec10 <= "0000"; --numbers_sec10_sign <= numbers_sec10_sign +1 ; --end if ; -- end if ; -- end process; Q_10_min <= QL; --numbers_sec10 <= numbers_sec10_sign; end beh; use ieee.std_logic_1164.all ; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; use ieee.std_logic_unsigned.all; entity counterSixtyMin is port ( clk_in_10_min, reset: in std_logic; q_Sixty_min_7_segment : out std_logic_vector (3 downto 0) ; --q_Sixty_min : out std_logic_vector (2 downto 0) ; q_Sixty_min_Signal : out std_logic; rst : in std_logic ); end counterSixtyMin; architecture arch of counterSixtyMin is signal cnt : std_logic_vector (2 downto 0); signal cnt_7_segnent : std_logic_vector (3 downto 0); begin process (clk_in_10_min, reset , rst ) begin if (reset = '1' or rst = '1') then cnt <= "000" ; cnt_7_segnent <= "0000"; elsif (clk_in_10_min'event and clk_in_10_min = '0') then if (cnt = "101") then cnt <= "000" ; cnt_7_segnent <= "0000"; else cnt <= cnt +1 ; cnt_7_segnent <= cnt_7_segnent+ 1; end if ; end if ; end process; --q_Sixty_min <= cnt; q_Sixty_min_Signal <= cnt(2); q_Sixty_min_7_segment <= cnt_7_segnent ; end arch; library ieee; use ieee.std_logic_1164.all ; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; use ieee.std_logic_unsigned.all; entity counterTenHours is port ( clk_1_hour , reset: in std_logic; q_10_HOURS : out std_logic_vector (3 downto 0) ; q_10_hoursSignal : out std_logic; rst : in std_logic ); end counterTenHours; architecture arch of counterTenHours is signal cnt : std_logic_vector (3 downto 0); begin process (clk_1_hour, reset , rst) begin if (reset = '1' or rst = '1') then cnt <= "0000" ; elsif (clk_1_hour'event and clk_1_hour = '0') then if (cnt = "1001") then cnt <= "0000" ; else cnt <= cnt +1 ; end if ; end if ; end process; q_10_HOURS <= cnt; q_10_hoursSignal <= cnt(3); end arch;

Here is your big problem - you are generating a load of clocks in logic. Dont do that. Generate enable signals instead and run ALL registers from the system clock "clk". also, your derived clocks look at falling edge, and other clocks look for rising edge. Convention is to have all clocks work on the rising edge. For a clock deisgn, you seem to have made it very complicated.

so you tell me that i have a single clock ? how can i reach this ? when 1 min goes the eneable of the counter to 10 min should be on for 1 pulse of the shared single clock ? i am not sure that is your idea ... the fpga module takes 50 mhz clock input - is this the shared clock that i should use or devided clock with T with 1 sec is it good idea to use frequency devidor to reach 1 second T or i shoud use enable ?

problem | Altera Community

13 Replies

Altera_Forum

Honored Contributor

16 years ago


library ieee;
use ieee.std_logic_1164.all ;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity counterTo20Hours  is 
port  (
clk_10_hour , reset: in std_logic; 
--q_2_HOURS : out   std_logic_vector (1 downto 0)  ;
q_2_HOURS_7_segment : out   std_logic_vector (3 downto 0) ;
rst : in std_logic 
);
end counterTo20Hours; 
architecture arch of counterTo20Hours is  
signal cnt : std_logic_vector (1 downto 0);
signal cnt_7 : std_logic_vector (3 downto 0);
begin
process   (clk_10_hour, reset, rst ) 
begin 
if (reset = '1' or rst = '1') then  cnt <= "00" ;   cnt_7 <= "0000";  
  elsif (clk_10_hour'event and clk_10_hour = '0') then
  
  if (cnt = "11")  then cnt <= "00" ; else  cnt <= cnt +1 ; cnt_7 <= cnt_7  +1 ; end if ;
  
  end if ; 
  
end process; 
--q_2_HOURS <= cnt; 
q_2_HOURS_7_segment <= cnt_7 ; 
end arch;


library ieee;
use ieee.std_logic_1164.all ;
use ieee.std_logic_arith.all;
entity decoder7seg is
    port (DIGIT : in std_logic_vector(3 downto 0);  
            SEG : out std_logic_vector(6 downto 0) );
end entity decoder7seg; 
architecture decoder7seg_a of decoder7seg is
    begin  
      --decode : process DIGIT is
      SEG <= "1000000" when DIGIT="0000" else   -- 0
             "1111001" when DIGIT="0001" else   -- 1
             "0100100" when DIGIT="0010" else   -- 2
             "0110000" when DIGIT="0011" else   -- 3library ieee;
             "0011001" when DIGIT="0100" else   -- 4
             "0010010" when DIGIT="0101" else   -- 5
             "0000010" when DIGIT="0110" else   -- 6
             "1111000" when DIGIT="0111" else   -- 7
             "0000000" when DIGIT="1000" else   -- 8
             "0010000" when DIGIT="1001" else   -- 9
             "0001000" when DIGIT="1010" else   -- A
             "0000011" when DIGIT="1011" else   -- b
             "1000110" when DIGIT="1100" else   -- C
             "0100001" when DIGIT="1101" else   -- d
             "0000110" when DIGIT="1110" else   -- E
             "0001110" when DIGIT="1111" else   -- F
             "0000000";
   
    end architecture decoder7seg_a;


library ieee;
use ieee.std_logic_1164.all ;
use ieee.std_logic_arith.all; 
use IEEE.STD_LOGIC_UNSIGNED.ALL;
use IEEE.numeric_std.ALL;
entity  clockTop is 
port  (
 
clk50Mhz :  in std_logic;
resetTop : in std_logic;
tenMinutesOut : out std_logic_vector (6 downto 0);
sixtyMinOut : out std_logic_vector (6 downto 0);
TenHoursOut : out std_logic_vector (6 downto 0);
TwoHoursOut : out std_logic_vector (6 downto 0)
  );
end clockTop;
  
  architecture struct of clockTop is
  
   component counter60seconds
 port  (
  clk, reset: in std_logic; 
  seconds60 : inout   std_logic  
);  
end component; 
  component  secondGenerator 
    port (
     CLK, RST :in std_logic;
     devided_clk : inout std_logic 
   --  Q :out std_logic_vector(24 downto 0)
) ;
  end component ; 
  
  
 component counterToTen is 
port  (
clk, reset: in std_logic; 
q_MIN : out   std_logic_vector (3 downto 0)  ;
q_10_minSignal : out std_logic;
rst : in std_logic
);
end component;  
component counterSixtyMin is 
port  (
clk_in_10_min, reset: in std_logic; 
q_Sixty_min_7_segment : out   std_logic_vector (3 downto 0)  ;
--q_Sixty_min : out   std_logic_vector (2 downto 0)  ;
q_Sixty_min_Signal : out std_logic;
rst : in std_logic
);
end component;
component counterTenHours is 
port  (
clk_1_hour , reset: in std_logic; 
q_10_HOURS : out   std_logic_vector (3 downto 0)  ;
q_10_hoursSignal : out std_logic;
rst : in std_logic
);
end component; 
component counterTo20Hours  is 
port  (
clk_10_hour , reset: in std_logic; 
--q_2_HOURS : out   std_logic_vector (1 downto 0)  ;
q_2_HOURS_7_segment : out   std_logic_vector (3 downto 0)  ; 
rst : in std_logic
);
end component; 
  component segment7
    port (DIGIT : in std_logic_vector(3 downto 0);  
            SEG : out std_logic_vector(6 downto 0) );
 end component;
 signal reset_sign : std_logic; 
 signal OneSecWire : std_logic ; 
 signal q_line : std_logic_vector(24 downto 0);
 signal OneMinWire : std_logic; 
 signal q_10_minutes_signal : std_logic_vector(3 downto 0);
 signal q_10_minSignal_IntSign : std_logic;
 signal q_Sixty_min_Signal_IntSign :   std_logic; 
 signal q_10_HOURS_IntSign_Vector :  std_logic_vector (3 downto 0); 
 signal q_10_hoursSignal_IntSign : std_logic; 
 signal q_2_HOURS_7_segment_IntSign : std_logic_vector (3 downto 0); 
 signal q_Sixty_min_7_segment_IntSign : std_logic_vector (3 downto 0);
 signal rst_signal : std_logic; 
 
 for ALL:  segment7 use entity work.decoder7seg(decoder7seg_a);
for ALL : counterTo20Hours use entity work.counterTo20Hours;
 for ALL : counterTenHours use entity work.counterTenHours;
   for ALL : counterSixtyMin use entity work.counterSixtyMin;
   for ALL:  counterToTen use entity work.counterToTen;
 for ALL:  secondGenerator use entity work.counter_devidor;
   for ALL : counter60seconds use entity work.counter60seconds;
  begin 
    secondGeneratorInst : secondGenerator port map ( clk50Mhz, reset_sign ,OneSecWire ) ; 
counter60secondsInst : counter60seconds port map (OneSecWire, reset_sign,  OneMinWire ) ;
counterToTenInst : counterToTen port map (
OneMinWire, reset_sign,
q_10_minutes_signal,
q_10_minSignal_IntSign,
rst_signal
);
counterSixtyMinInst : counterSixtyMin  
port  map(
q_10_minSignal_IntSign, reset_sign,
q_Sixty_min_7_segment_IntSign  ,
--q_Sixty_min : out   std_logic_vector (2 downto 0)  ,
q_Sixty_min_Signal_IntSign,
rst_signal
);
counterTenHoursInst :counterTenHours 
port map  (
q_Sixty_min_Signal_IntSign , reset_sign, 
q_10_HOURS_IntSign_Vector,
q_10_hoursSignal_IntSign,
rst_signal
);
counterTo20HoursInst: counterTo20Hours   
port map (
q_10_hoursSignal_IntSign , reset_sign,
--q_2_HOURS : out   std_logic_vector (1 downto 0)  ;
q_2_HOURS_7_segment_IntSign,
rst_signal
);
segment7_10Min : segment7 port map (q_10_minutes_signal, tenMinutesOut); 
segment7_60Min : segment7 port map (q_Sixty_min_7_segment_IntSign, sixtyMinOut); 
segment7_10hours : segment7 port map (q_10_HOURS_IntSign_Vector, TenHoursOut); 
segment7_2hours : segment7 port map (q_2_HOURS_7_segment_IntSign, TwoHoursOut); 
  process   (clk50Mhz, resetTop, q_2_HOURS_7_segment_IntSign ,  q_10_HOURS_IntSign_Vector , q_Sixty_min_7_segment_IntSign , q_10_minutes_signal ) 
  begin
    if (clk50Mhz'event and clk50Mhz = '1') then
    if (q_2_HOURS_7_segment_IntSign = "0010" and  q_10_HOURS_IntSign_Vector = "0011"   and  q_Sixty_min_7_segment_IntSign = "0101"   and q_10_minutes_signal = "1001" ) then 
       rst_signal <= '1';
end if;
end if ; 
  end process; 
 reset_sign <= resetTop;
end;

that is ... in simulation is ok ... but ot nthe fpga do not works ...

Altera_Forum

Honored Contributor

16 years ago


library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity counter_devidor is
port (
     CLK, RST :in std_logic;
     devided_clk : inout std_logic
--   Q :out std_logic_vector(24 downto 0)
) ;
end counter_devidor;
architecture beh of counter_devidor is
signal QL : std_logic_vector (24 downto 0);
begin
process(CLK, RST) begin
  if (RST = '1') then
    QL <= "1011111010111100001000000";        
    devided_clk <= '0';
  elsif (CLK'event and CLK = '1') then
    if (QL = "0000000000000000000000000") then       
      QL <= "1011111010111100001000000";         
      devided_clk <= not(devided_clk);            
    else
      QL <= QL - 1; 
                          
    end if;
  end if;
end process;
--Q <= QL;
end beh;


library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity counter60seconds  is 
port  (
clk, reset: in std_logic; 
seconds60 : inout   std_logic  
);
end counter60seconds; 
architecture beh of counter60seconds is  
signal cnt : std_logic_vector (5 downto 0);
--signal  sec_sign : std_logic; 
begin
process   (clk, reset ) 
begin 
  if (reset = '1') then  cnt <= "111100" ; seconds60 <= '0' ;  else  
   if (clk'event and clk = '1') then
   if (reset /= '1') then if (cnt = "000001") then seconds60 <= not(seconds60);   cnt <= "011110";   else  cnt <= cnt - 1 ; end if;  end if ;  
    end if;                                                                                                                       
end if ; 
end process; 
end beh;


library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity counter_10_min is
port (
     CLK, RST :in std_logic;
     devided_clk_10_sec : inout std_logic; 
     Q_10_min :out std_logic_vector(3 downto 0);
     numbers_min10 :inout std_logic_vector(3 downto 0);
     flagFirst : inout std_logic
) ;
end counter_10_min;
architecture beh of counter_10_min is
signal QL : std_logic_vector (3 downto 0);
--signal  numbers_sec10_sign  :  std_logic_vector (3 downto 0);
begin
process(CLK, RST) begin
  if (RST = '1') then
    QL <= "1010";       
    flagFirst <= '0';
  --  numbers_sec10 <= "0000";
   devided_clk_10_sec <= '0';
  elsif (CLK'event and CLK = '1') then
    if (QL = "0001") then       
      QL <= "0101";         
      devided_clk_10_sec <= not(devided_clk_10_sec);
       flagFirst <= '1';       
    else
   
      QL <= QL - 1; 
      
                          
    end if;
  end if;
end process;
--process(CLK, RST, devided_clk_10_sec) begin
  --  if (RST = '1') then
    -- numbers_sec10_sign <= "0000"; 
  --elsif (devided_clk_10_sec'event and devided_clk_10_sec='1' ) then 
  --numbers_sec10 <= "0000"; 
  --numbers_sec10_sign <= numbers_sec10_sign +1 ; 
  --end if ; 
 -- end if ; 
 -- end process;
  
Q_10_min <= QL;
--numbers_sec10 <=  numbers_sec10_sign;
end beh;


use ieee.std_logic_1164.all ;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity counterSixtyMin is 
port  (
clk_in_10_min, reset: in std_logic; 
q_Sixty_min_7_segment : out   std_logic_vector (3 downto 0)  ;
--q_Sixty_min : out   std_logic_vector (2 downto 0)  ;
q_Sixty_min_Signal : out std_logic;
rst : in std_logic
);
end counterSixtyMin; 
architecture arch of counterSixtyMin is  
signal cnt : std_logic_vector (2 downto 0);
signal cnt_7_segnent : std_logic_vector (3 downto 0);
begin
process   (clk_in_10_min, reset , rst ) 
begin 
if (reset = '1' or rst = '1') then  cnt <= "000"  ;   cnt_7_segnent <= "0000";
  elsif (clk_in_10_min'event and clk_in_10_min = '0') then
  
  if (cnt = "101")  then cnt <= "000" ;   cnt_7_segnent <= "0000"; else cnt <= cnt +1 ; cnt_7_segnent <= cnt_7_segnent+ 1; end if ;
  
  end if ; 
  
end process; 
--q_Sixty_min <= cnt; 
q_Sixty_min_Signal <=  cnt(2);
q_Sixty_min_7_segment <= cnt_7_segnent ;
end arch;


library ieee;
use ieee.std_logic_1164.all ;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity counterTenHours is 
port  (
clk_1_hour , reset: in std_logic; 
q_10_HOURS : out   std_logic_vector (3 downto 0)  ;
q_10_hoursSignal : out std_logic;
rst : in std_logic
);
end counterTenHours; 
architecture arch of counterTenHours is  
signal cnt : std_logic_vector (3 downto 0);
begin
process   (clk_1_hour, reset , rst) 
begin 
if (reset = '1' or rst = '1') then  cnt <= "0000" ;     
  elsif (clk_1_hour'event and clk_1_hour = '0') then
  
  if (cnt = "1001")  then cnt <= "0000" ; else cnt <= cnt +1 ; end if ;
  
  end if ; 
  
end process; 
q_10_HOURS <= cnt; 
q_10_hoursSignal <=  cnt(3);
end arch;

Altera_Forum
Honored Contributor
16 years ago
Post some code and we can have a look.

From what you say, I can only guess that you have use a bad coding style, but without seeing the code I cant say any more.

Forum Discussion

problem

13 Replies

Recent Discussions

IS25LP064A interface with Cyclone V HPS

Cyclone10LP Remote System Upgrade

Agilex 5 RCOMP_GTS connection change and its effect on HVIO input pins

The DC_FIFO issue of Cyclone 10 GX devices

The Quartus Prime Lite Edition Installer 23.1