Forum Discussion

Sho2301's avatar
Sho2301
Icon for New Contributor rankNew Contributor
1 year ago

External Flash not recognized by PFL and Quartus Programmer

Hi,

i am trying to program an externl QSPI device with the help of the Parallel Flash Loader IP core and currently stuck on the problem that the flash is not recognized by Quaruts Programmer if i hit Auto Detect. The flash device i'm using is the Micron MT25QL256ABA8ESF with the PFl instatiated on a 10M08SAU169I7G MAX10 Device. Would appreciate any advice on how to program the external QSPI flash. I've attached my PFL project below.

Thank you.

Configuration
Generic Io
Programmable Logic Device

2 Replies

  • FakhrulA_altera's avatar
    FakhrulA_altera
    Icon for Regular Contributor rankRegular Contributor
    1 year ago

    Hi Sho2301.


    Have you tried to program the FPGA directly using sof file?


    Regards,

    Fakhrul


  • FakhrulA_altera's avatar
    FakhrulA_altera
    Icon for Regular Contributor rankRegular Contributor
    1 year ago

    As we haven't received a response to our previous notification, this thread will be transitioned to community support. We hope all your concerns have been addressed. If you have any new questions, please feel free to open a new thread to receive support from Intel experts. Otherwise, community users will continue to assist you here. Thank you.