Need Step-by-Step Guide: Configuring Arria 10 HPS for UART0 Access (Tools & Workflow)

Hi ESSEN,

Here is the link for updated Arria10 SoC device GSRD based on Altera Arria10 SoC Dkit.

https://altera-fpga.github.io/rel-26.1/embedded-designs/arria-10/sx/soc/gsrd/ug-gsrd-a10sx-soc/

Here is the link of how to build Quartus project, Uboot and Linux step by step.

https://altera-fpga.github.io/rel-26.1/embedded-designs/arria-10/sx/soc/boot-examples/ug-linux-boot-a10-soc/

Here is the link of the Altera Arria10 SoC Dkit

https://www.altera.com/products/devkit/po-3006/arria-10-sx-soc-development-kit

After you go through these links, you should be able to get the answers for your questions. If not, please let us know.

Here are some other documents which may help you use Arria 10 SoC device better.

https://docs.altera.com/r/docs/683735/current/arria-10-soc-boot-user-guide/arria-10-soc-boot-user-guide

https://docs.altera.com/r/docs/683711/25.3.1/arria-10-hard-processor-system-technical-reference-manual/arria-10-hard-processor-system-technical-reference-manual-revision-history

https://docs.altera.com/r/docs/683437/current/an-860-using-arria-10-soc-fpga-early-i/o-release/introduction

Best Regards