Forum Discussion

C_HWANG's avatar
C_HWANG
Icon for New Contributor rankNew Contributor
9 days ago

A5EG013BB18A OPN is visible in Quartus but not listed in Program File Generator

Hi everyone, I am currently working on programming an SCM FPGA board using Intel Quartus 25.1 . Our target FPGA OPN is A5EG013BB18A. I need to generate a .jic file from a .sof file by using the Pr...
general
Platform
  • Jay's avatar
    Jay
    Icon for New Contributor rankNew Contributor
    4 days ago

    Hi Fakhrul,

    The problem is Programming File Generator can't find the OPN: A5EG013BB18A in Quartus 25.1.

    I have installed the Quartus 26.1, and also can't find OPN:A5EG013BB18A.

    Have any workaround for SOF to JIC file generation for OPN: A5EG013BB18A?

    Thanks,

    Jay

     

  • C_HWANG's avatar
    C_HWANG
    Icon for New Contributor rankNew Contributor
    4 days ago

    Hi Fakhrul,

    Thank you for your reply.

    As shown in the screenshot in my post, I’m able to compile the design and generate the .sof file for this OPN in Quartus 25.1. I can also successfully download the .sof file to the device.

    However, the issue occurs when I try to generate the .jic file, as described in the post.

    Best Regards,

    Caleb

  • C_HWANG's avatar
    C_HWANG
    Icon for New Contributor rankNew Contributor
    1 day ago

    Hi Fakhrul,

    Thank you for your reply.

    Yes, I was able to compile the design and generate the .sof programming file using that OPN in Quartus 25.1. I can also successfully download the .sof file to the device.

    However, the issue occurs when I try to generate the .jic file, as shown in the screenshot/message in my previous post.

    Do you have any further suggestions or recommended steps for this issue?

    Regards,

    Caleb