isp1362 usb hcd driver

You should not select isp116x driver in kernel config.

You should not change nios2_system.h, too.

jay_1025 is also testing the same isp1362 driver, on previous thread.

http://forum.niosforum.com/forum/index.php?showtopic=3706 (http://forum.niosforum.com/forum/index.php?showtopic=3706)

Hi,

I complie the isp1362 after I update my kernel 2.6.16.1, and there is no error now, and then I changed the usb Makefile ISP1362X to ISP1362, but I couldn't found the isp1362.o in host folder.

When I boot uClinux on DE II board, I couldn't got any message about ISP1362.

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

uClinux/Nios II

Altera Nios II support © 2004 Microtronix Datacom Ltd.

setup_arch: No persistant network settings signature at 008F0000

Built 1 zonelists

Kernel command line:

PID hash table entries: 64 (order: 6, 1024 bytes)

Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)

Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)

Memory available: 6272k/8192k RAM, 0k/0k ROM (1332k kernel code, 471k data)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

NET: Registered protocol family 16

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

Serial: JTAG UART driver $Revision: 1.4 $

ttyJ0 at MMIO 0x81004000 (irq = 1) is a jtag_uart

io scheduler noop registered

io scheduler deadline registered

dmfe_probe:eth0, 50000 Khz Nios

<DM9000> eth0 I/O: 80900090, VID: 90000a46

ADDR: 00:07:ed:00:00:00

dmfe_probe:eth1, 50000 Khz Nios

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP established hash table entries: 512 (order: 0, 4096 bytes)

TCP bind hash table entries: 512 (order: -1, 2048 bytes)

TCP: Hash tables configured (established 512 bind 512)

NET: Registered protocol family 1

NET: Registered protocol family 17

Freeing unused kernel memory: 352k freed (0x15e000 - 0x1b5000)

init started: BusyBox v1.1.1-pre0 (2006.04.18-08:58+0000) multi-call binary

BusyBox v1.1.1-pre0 (2006.04.18-08:58+0000) Built-in shell (msh)

Enter &#39;help&#39; for a list of built-in commands.

# [/b]

--- Quote End ---

I think ISP1362 wasn&#39;t work, how to solve it?

--- Quote Start ---

originally posted by goral@Apr 22 2006, 09:28 AM

hi,

i complie the isp1362 after i update my kernel 2.6.16.1, and there is no error now, and then i changed the usb makefile isp1362x to isp1362, but i couldn&#39;t found the isp1362.o in host folder.

when i boot uclinux on de ii board, i couldn&#39;t got any message about isp1362.

<div class='quotetop'>quote

--- quote end ---

--- quote start ---

uclinux/nios ii

altera nios ii support © 2004 microtronix datacom ltd.

setup_arch: no persistant network settings signature at 008f0000

built 1 zonelists

kernel command line:

pid hash table entries: 64 (order: 6, 1024 bytes)

dentry cache hash table entries: 2048 (order: 1, 8192 bytes)

inode-cache hash table entries: 1024 (order: 0, 4096 bytes)

memory available: 6272k/8192k ram, 0k/0k rom (1332k kernel code, 471k data)

mount-cache hash table entries: 512 (order: 0, 4096 bytes)

net: registered protocol family 16

scsi subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

serial: jtag uart driver $revision: 1.4 $

ttyj0 at mmio 0x81004000 (irq = 1) is a jtag_uart

io scheduler noop registered

io scheduler deadline registered

dmfe_probe:eth0, 50000 khz nios

<dm9000> eth0 i/o: 80900090, vid: 90000a46

addr: 00:07:ed:00:00:00

dmfe_probe:eth1, 50000 khz nios

initializing usb mass storage driver...

usbcore: registered new driver usb-storage

usb mass storage support registered.

net: registered protocol family 2

ip: routing cache hash table of 512 buckets, 4kbytes

tcp established hash table entries: 512 (order: 0, 4096 bytes)

tcp bind hash table entries: 512 (order: -1, 2048 bytes)

tcp: hash tables configured (established 512 bind 512)

net: registered protocol family 1

net: registered protocol family 17

freeing unused kernel memory: 352k freed (0x15e000 - 0x1b5000)

init started: busybox v1.1.1-pre0 (2006.04.18-08:58+0000) multi-call binary

busybox v1.1.1-pre0 (2006.04.18-08:58+0000) built-in shell (msh)

enter &#39;help&#39; for a list of built-in commands.

#

--- Quote End ---

I think ISP1362 wasn&#39;t work, how to solve it?

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=14559)</div>

[/b]

--- Quote End ---

There is a bug in the patch.

Please fix drivers/usb/Makefile to inlcude host dir for isp1362 just like the one for isp116x .

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

There is a bug in the patch.

Please fix drivers/usb/Makefile to inlcude host dir for isp1362 just like the one for isp116x .[/b]

--- Quote End ---

THX , I&#39;ve changed it after I read Shindou&#39;s topic, these boot message generate was I changed the Makefile.

--- Quote Start ---

originally posted by goral@Apr 22 2006, 11:36 PM

<div class='quotetop'>quote

--- quote end ---

--- quote start ---

there is a bug in the patch.

please fix drivers/usb/makefile to inlcude host dir for isp1362 just like the one for isp116x .

--- Quote End ---

THX , I&#39;ve changed it after I read Shoidou&#39;s topic, these boot message generate was I changed the Makefile.

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=14566)</div>

[/b]

--- Quote End ---

Do you have isp1362-hcd.o in drivers/usb/host/ dir ?

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

obj-$(CONFIG_USB) += core/

obj-$(CONFIG_USB_EHCI_HCD) += host/

obj-$(CONFIG_USB_OHCI_HCD) += host/

obj-$(CONFIG_USB_UHCI_HCD) += host/

obj-$(CONFIG_USB_SL811_HCD) += host/

obj-$(CONFIG_USB_ISP116X_HCD) += host/

obj-$(CONFIG_USB_ISP1362_HCD) += host/

obj-$(CONFIG_ETRAX_USB_HOST) += host/

obj-$(CONFIG_USB_ACM) += class/

obj-$(CONFIG_USB_AUDIO) += class/

obj-$(CONFIG_USB_BLUETOOTH_TTY) += class/

obj-$(CONFIG_USB_MIDI) += class/

obj-$(CONFIG_USB_PRINTER) += class/

...

[/b]

--- Quote End ---

This is my Makefile in /drivers/usb/

hi guys,

sorry - was a bit busy the last 2 wks so didn&#39;t get a chance to get further with it yet.

as for the missing object file problem - as i recall, one of the Makefiles in the directory structure wasn&#39;t point to the right directory so the file&#39;s not compiled - i&#39;ll check up on that tmrw when i take a look at it.

When clean all work before I do, I compile my kernel, I got so many errors, I using isp1362.diff to patch the usb driver.

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

CC drivers/usb/host/isp1362-hcd.o

drivers/usb/host/isp1362-hcd.c:1293: error: syntax error before "gfp_t"

drivers/usb/host/isp1362-hcd.c:1294: warning: function declaration isn&#39;t a prototype

drivers/usb/host/isp1362-hcd.c: In function `isp1362_urb_enqueue&#39;:

drivers/usb/host/isp1362-hcd.c:1295: error: `hcd&#39; undeclared (first use in this function)

drivers/usb/host/isp1362-hcd.c:1295: error: (Each undeclared identifier is reported only once

drivers/usb/host/isp1362-hcd.c:1295: error: for each function it appears in.)

drivers/usb/host/isp1362-hcd.c:1296: error: `urb&#39; undeclared (first use in this function)

drivers/usb/host/isp1362-hcd.c:1333: error: `hep&#39; undeclared (first use in this function)

drivers/usb/host/isp1362-hcd.c:1334: error: `mem_flags&#39; undeclared (first use in this function)

drivers/usb/host/isp1362-hcd.c:1341: warning: implicit declaration of function `HC_IS_RUNNING&#39;

drivers/usb/host/isp1362-hcd.c: In function `isp1362_mem_config&#39;:

drivers/usb/host/isp1362-hcd.c:2415: warning: int format, long unsigned int arg (arg 5)

drivers/usb/host/isp1362-hcd.c:2418: warning: int format, long unsigned int arg (arg 5)

drivers/usb/host/isp1362-hcd.c: In function `isp1362_hc_start&#39;:

drivers/usb/host/isp1362-hcd.c:2776: error: `HC_STATE_RUNNING&#39; undeclared (first use in this function)

drivers/usb/host/isp1362-hcd.c: At top level:

drivers/usb/host/isp1362-hcd.c:2818: error: unknown field `bus_suspend&#39; specified in initializer

drivers/usb/host/isp1362-hcd.c:2819: error: unknown field `bus_resume&#39; specified in initializer

drivers/usb/host/isp1362-hcd.c: In function `isp1362_remove&#39;:

drivers/usb/host/isp1362-hcd.c:2828: warning: implicit declaration of function `platform_get_drvdata&#39;

drivers/usb/host/isp1362-hcd.c:2828: warning: initialization makes pointer from integer without a cast

drivers/usb/host/isp1362-hcd.c:2834: warning: implicit declaration of function `usb_remove_hcd&#39;

drivers/usb/host/isp1362-hcd.c: In function `isp1362_probe&#39;:

drivers/usb/host/isp1362-hcd.c:2927: error: too many arguments to function `usb_create_hcd&#39;

drivers/usb/host/isp1362-hcd.c:2932: error: structure has no member named `rsrc_start&#39;

drivers/usb/host/isp1362-hcd.c:2958: warning: implicit declaration of function `usb_add_hcd&#39;

drivers/usb/host/isp1362-hcd.c: At top level:

drivers/usb/host/isp1362-hcd.c:3043: error: variable `isp1362_driver&#39; has initializer but incomplete type

drivers/usb/host/isp1362-hcd.c:3044: error: unknown field `probe&#39; specified in initializer

drivers/usb/host/isp1362-hcd.c:3044: warning: excess elements in struct initializer

drivers/usb/host/isp1362-hcd.c:3044: warning: (near initialization for `isp1362_driver&#39;)

drivers/usb/host/isp1362-hcd.c:3045: error: unknown field `remove&#39; specified in initializer

drivers/usb/host/isp1362-hcd.c:3045: warning: excess elements in struct initializer

drivers/usb/host/isp1362-hcd.c:3045: warning: (near initialization for `isp1362_driver&#39;)

drivers/usb/host/isp1362-hcd.c:3047: error: unknown field `suspend&#39; specified in initializer

drivers/usb/host/isp1362-hcd.c:3047: warning: excess elements in struct initializer

drivers/usb/host/isp1362-hcd.c:3047: warning: (near initialization for `isp1362_driver&#39;)

drivers/usb/host/isp1362-hcd.c:3048: error: unknown field `resume&#39; specified in initializer

drivers/usb/host/isp1362-hcd.c:3048: warning: excess elements in struct initializer

drivers/usb/host/isp1362-hcd.c:3048: warning: (near initialization for `isp1362_driver&#39;)

drivers/usb/host/isp1362-hcd.c:3049: error: unknown field `driver&#39; specified in initializer

drivers/usb/host/isp1362-hcd.c:3049: error: extra brace group at end of initializer

drivers/usb/host/isp1362-hcd.c:3049: error: (near initialization for `isp1362_driver&#39;)

drivers/usb/host/isp1362-hcd.c:3052: warning: excess elements in struct initializer

drivers/usb/host/isp1362-hcd.c:3052: warning: (near initialization for `isp1362_driver&#39;)

drivers/usb/host/isp1362-hcd.c: In function `isp1362_init&#39;:

drivers/usb/host/isp1362-hcd.c:3063: warning: implicit declaration of function `platform_driver_register&#39;

drivers/usb/host/isp1362-hcd.c: In function `isp1362_cleanup&#39;:

drivers/usb/host/isp1362-hcd.c:3070: warning: implicit declaration of function `platform_driver_unregister&#39;

drivers/usb/host/isp1362-hcd.c: At top level:

drivers/usb/host/isp1362-hcd.c:3043: error: storage size of `isp1362_driver&#39; isn&#39;t known

drivers/usb/host/isp1362-hcd.c:1581: warning: &#39;isp1362_bus_suspend&#39; declared `static&#39; but never defined

make[3]: *** [drivers/usb/host/isp1362-hcd.o] Error 1

make[2]: *** [drivers/usb/host] Error2

make[1]: *** [drivers/usb] Error 2

make: *** [drivers] Error 2[/b]

--- Quote End ---

I clean my work like as hippo mentioned in this topic:

http://forum.niosforum.com/forum/index.php?showtopic=3706 (http://forum.niosforum.com/forum/index.php?showtopic=3706)

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

# remove old linux source

rm -rf ~/linux-2.6.x ~/mysvn/2.6.11-uc0# kernel 2.6.11-uc0 source ported by microtronix

cp -a ~/download/mx140/plugins/com.microtronix.nios2linux.kernel_1.4.0/linux-2.6.x ~

cd ~/linux-2.6.x

patch -p0 <~/download/kernel.diff

cp ~/download/kernel.config ~/linux-2.6.x/.config

patch -p0 <~/download/isp1362.diff[/b]

--- Quote End ---

Need I update my kernel or how to solve ?