Honored ContributorWhere is the place I can add the new tool chain from the DS-5? I wanted to use the MinGW gcc compiler. Pls help ! I am using window 7 operating system with 15.0 Soceds.
Honored ContributorIf you with window environment try this guide.. this tool will help you to set the environment in the window and include the DS-5 tool path
"http://www.mingw.org/wiki/howto_install_the_mingw_gcc_compiler_suite" easier than A B C...Honored ContributorYou can go to the project property, C+++ then environment to check after the installation of the mingw tool kit. Also please go to the tool chain editor and see if the new tool chain had been installed correctly.
Honored ContributorThanks , I already install the Mingw tool. it is another stand alone installer, so just check accordingly? for which tool chain I required?
Honored Contributorjust launch the minGW launcher... select the basic tab. select all tool chain there... and let the installer configure everything.
Honored ContributorGreat ! Where i can select the tool chain?
Honored ContributorHonored ContributorOf course this depend on what you going to build, sometime it may flag for some warning message for some data format or syntax. cheers.
Honored ContributorI am doing some university project ..
Honored Contributorthe installation had already included several type of usable compilers for users.. i believe is sufficient for normal application users.
Honored Contributoragree with citybank!
