Honored ContributorHi
Can anyone post please the original vip_example_design_3c120 design as mentioned in the AN 427 document.Or give me a link to get the example design for the ALTERA
Honored Contributorthanx ,,,, but i have error in nios ii that connected system is don't found
Honored ContributorDid you include your Sopc degin in the Quartus and add the files in the project?Add all the sdc files in the design?It should not come like that..I am surprised.Can u post your warnings?Check the warnings.You might be missing some thing there to add in your design.
Honored Contributorthere is no thing about quatus but it with Nios i put sysid in qsys ,,, that generate expected id and expected timestamp but don't found connected id
Honored Contributorthat's my graduate project and i hope to solve this problem
Honored ContributorHi,
I can understand.Just stay cool.I think if you use the free version the timestamp is not detected neither the sysid.Better ignore both the options.it wont bring any big difference in the system as it is you dont have multiple systems.Ignore them and proceed.You will get it working.If you want I can put up the example code here.But the file size is too big I guess.There are many posts on the forum with regard to the problem you are facing of the timestamp.Ignore it better I suggest. SnHonored Contributorthanx 4 replaying ....... i ignored both .... and run as hardware nios ii and every thing alright .. but the video can't pass through kit to monitor
Honored Contributori hope i get your code to check my results
Honored Contributori put sysid in qsys this solve the expected id and timestamp .....
but the problem : " connected id : don't found "Honored Contributorplz send me the code via email
Honored ContributorHey
Do u have the daughter video card from bitec?U can try the code from bitec I have verified and it is working. Try to download the J8.sof of this example DVI 1080P Loop-through (Beta) The link is http://www.bitec.ltd.uk/ciii_video_dev_kit.html You may have to check the settings of the monitor also and select the DVI monitor.If you have a graphics card it will give u an option to choose the multiple monitor.Choose the correct moitor and set the refresh rate to 54 or 56 .And also the correct image format of DVI
