arlen
New Contributor
New Contributordeinterlace IP
deinterlace II ip ，when i select 8bit or 12bit of color sample, my program is working properly, but when i select 10bit, is abnormal. The input is the same
Forum Discussion
Deshi_Intel
Regular Contributor
Regular ContributorSorry, typo in my earlier post
When bus width goes higher, the expected operating frequency should goes lower.
- Assuming bus width = 128, required operating frequency = xxx MHz
- when bus width = 256, required operating frequency = xxx MHz divided by 2
- when bus width = 512, required operating frequency = xxx MHz divided by 4
