Forum Discussion

DanD's avatar
DanD
Icon for New Contributor rankNew Contributor
5 years ago
Solved

100G core missing SOP/EOP handling on TX

How does the Stratix 10 low-latency 100G core handle missing SOP or EOP on its TX interface? (l8_tx_*)?
  • Deshi_Intel's avatar
    Deshi_Intel
    5 years ago

    Hi,


    I would expect the Tx MAC IP to wait for the completion of either missing SOP or EOP then assert l8_txstatus_error[6:0].


    However, this issue shouldn't happen in the first place and should be taken care by the HOST application.

    • If worst case there is issue with transmitted packet then I expect the HOST application to assert "l8_tx_error" to alert TX MAC IP


    Feel free to play around and test it out in simulation design


    Thanks.


    Regards,

    dlim


Deshi_Intel's avatar
Deshi_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


I would expect the Tx MAC IP to wait for the completion of either missing SOP or EOP then assert l8_txstatus_error[6:0].


However, this issue shouldn't happen in the first place and should be taken care by the HOST application.

  • If worst case there is issue with transmitted packet then I expect the HOST application to assert "l8_tx_error" to alert TX MAC IP


Feel free to play around and test it out in simulation design


Thanks.


Regards,

dlim