problem Master LCD of Read/write in cyclone II with vhdl

hello,

yes i work with The Optrex 16207 LCD in the cyclone II

for all signal of controller LCD i attached in the top level this is

LCD_ON <='1';

LCD_BLON <= '1';

component_sopc_LCD :sopc_LCD

port map (

LCD_E_from_the_lcd_0 => LCD_EN,

LCD_RS_from_the_lcd_0 => LCD_RS,

LCD_RW_from_the_lcd_0 => LCD_RW,

LCD_data_to_and_from_the_lcd_0 =>LCD_DATA,

.......

);

i don't know if you inderstand my question is : i would create a Master who write and read in the LCD !the pb of initialzation of lcd ??

you find a code who i wrote attached to this replyhttps://www.alteraforum.com/forum/attachment.php?attachmentid=2738