Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

No output in simulation after connecting FIR and FFT using SOPC Builder

Hi, all, Sorry if I have posted in a wrong place. But I am really desperate now. Here is my problem: I am using Quartus II 9.0sp2. Now I am trying to connect FIR compiler to FFT using SOP...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

The SOPC system looks good... It would be interesting to see the signals between the channel adapter and the fft to see what's really happening. They are more difficult to catch, as you must go a bit deeper in the SOPC system to look for them.

Shouldn't the clk_ena_to_the_my_fft_0 be 1?