Forum Discussion
patrick03
New Contributor
New ContributorMax10 FPGA Programming with .pof file
Hello All, we are using 10M16 FPGA in our design. Observation is that we are able to program the FPGA using .sof every time but .pof gets installed on most boards 8/10 times and on few boards fails ...
patrick03New Contributor
New ContributorHello Frank,
Appreciate your quick response. Out of few possible trials I remember we did reduce the JTAG clk (Default 24MHz) to ~10Mhz. I will retry with even lower clk and with a capacitor. Will revert shortly. Thank you.
FakhrulA_altera
Regular Contributor
Regular ContributorHi Patrick03,
Any updates on the suggested steps?
Regards,
Fakhrul
