Forum Discussion

linhviet306's avatar
linhviet306
Icon for New Contributor rankNew Contributor
1 year ago
Solved

How do I program EPCQ on Cyclone V GT Development Kit

Hi, Please advise me how do I program the FPGA using .jic file? I converted my .sof file to .jic with EPCQ256. I assumed this is the one in the dev kit. I checked the schematic in the cd content I dow...
Configuration
Programmable Logic Device
  • lixy's avatar
    lixy
    1 year ago

    Hi,


    The right part number for U29 should be IDTQS3861QG.

    You may provide us your address and we can ship the right U29 parts to you. If you do not want to expose your personal information, please send through "Private Message".

    Thanks!


    Best Regards,

    Xiaoyan


linhviet306's avatar
linhviet306
Icon for New Contributor rankNew Contributor
1 year ago

Hi, thank you for your response!

We can change the component if we have the correct parts. Would you mind providing us the right part?

FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
1 year ago
If I understand right, the issue isn't caused by EPCQ flash U33 but buffer U29. MT25QL256ABA8ESF is apparently suited as EPCQ256 replacement.
  • linhviet306's avatar
    linhviet306
    Icon for New Contributor rankNew Contributor
    1 year ago

    Hi, do you know which buffer should be used for U29?