Forum Discussion
New ContributoreFUSE : Agilex F series and AGilex I series PCIe card
Hi,
While going through the schematics design of Agilex F series(1xE tile, 1X P tile) pcie card, I observed that in the there is a efuse "TPS259824" each for the 12v input from PCIe slot and 12V input from AUX connector where as in Agilex I series (2x R tiles, 1x F tile) pcie card it is removed from the schematics.
EFuse protects the board from over current and inrush current, short circuit and overload, why is it removed from the Agilex I series Pcie card.
PS: Please check the shared screen shots from schematics
3 Replies
AqidAyman_AlteraRegular Contributor
Hi,
May I know if you are referring to Altera development kit below?
Agilex™ 7 FPGA F-Series Development Kit (P-Tile and E-Tile) | Altera
Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile, Rev B) | Altera
Please confirm.
Regards,
Aqid
raghavendra_keshmoni- AqidAyman_Altera
Hi,
I checked the schematic provided in Agilex™ 7 FPGA F-Series Development Kit (P-Tile and E-Tile) but did not find the same as you the picture you attached before.
Can you confirm where did you get the schematic?
I need to confirm if we are referring to the correct schematic so that I can find the respective owner to get the answer.
Regards,
Aqid
