Forum Discussion

New Contributor

9 months ago

Solved

Configuring Arria10 from HPS

Hello everyone, I'm using the HAN Pilot Platform with the Arria 10AS066K3F40E2SG FPGA Chip. Quartus Version 24.3 Embedded Shell Version 20.1 I want to configure the FPGA via HPS on a very basic l...

Board Debug

Configuration

Jeet14
9 months ago
Hi,

I found the below link where it is mentioned that configuring the FPGA fabric from Linux using the Linux device tree overlays method is not supported in Intel® Arria® 10 SoC FPGA
https://www.intel.com/content/www/us/en/support/programmable/articles/000090173.html

But, you can use the partial reconfiguration (PR) solution where Linux device tree overlays method is supported.
https://www.rocketboards.org/foswiki/Projects/Arria10SoC170HardwareReferenceDesignThatDemostratesPartialReconfiguration

Regards
Tiwari

Jeet14

Frequent Contributor

8 months ago

I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.

Forum Discussion

Configuring Arria10 from HPS

Recent Discussions

Bidirectional differential port on MAX10

Backplane Ethernet 10GBASE-KR PHY FPGA IP

B32A (1591) Package Mechanical Drawing

Cyclone 10 LP's Extended Industrial parts

System PLL of Agliex5 PCIE example design cannot be locked after configuration