buildroot to build toolchain on Linux

i make a newsimple services file,and I can run inetd.

this is my services file:

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

ftp-data 20/tcp

ftp 21/tcp

telnet 23/tcp

uptime 24/tcp

http 80/tcp[/b]

--- Quote End ---

but I can&#39;t use telnet on a pc to connect my board.

it saied:

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

telnetd:all network ports in use.[/b]

--- Quote End ---

netstat

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

tcp 0 0 218.192.170.81:telnet 218.192.170.250:3520 TIME_WAIT[/b]

--- Quote End ---

and i run ps

ps

i can see "inetd",but i can&#39;t see telnetd.

why it say "telnetd:all network ports in use."

how can i do?

my inetd.conf file:

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

ftp stream tcp nowait root /bin/ftpd

telnet stream tcp nowait root /bin/telnetd

uptime stream tcp nowait root cat /proc/uptime /etc/issue[/b]

--- Quote End ---

and in my fstab file also has the pts

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

devpts /dev/pts devpts defaults,gid=5,mode=620 0 0[/b]

--- Quote End ---

<div class='quotetop'>QUOTE </div>

--- Quote Start ---

there is a problem

"can&#39;t find services"

I already have "services" file in the dir etc/[/b]

--- Quote End ---

Please check your ~/rootfs/etc/inetd.conf ,

if you have the server for each service.

hippo,thanks very much.the 2.6.16.1 kernel runs on my board.

but I run

inetd&

there is a problem

"can&#39;t find services"

I already have "services" file in the dir etc/

what can i do?

thanks in advance.

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=13451)</div>

--- Quote End ---

phill,

you may try either busybox 1.1.0 or 1.2.0 .

You will have to patch Makefile of busybox, add elf2flt ldflags to busybox_unstripped.

-Wl,-elf2flt="-s 16000" -Wl,-v -Wl,-d

remove the busybox_unstripped and busybox elf obj and make again

I would like to pay my great appreciation to you,here!

Best Regards,

FeiWu

sorry, I make a mistake. In ~/buildroot/build_nios2/busybox, the busybox is busybox-1.2.0. so that i cannot patch.

1.do busybox-1.2.0 need patch??

nios2-linux-uclibc-flthdr build_nios2/busybox/busybox

I get an error message :

QUOTE

Cannot read header of ../buildroot/build_nios2/busybox/busybox

2. iI try another way too. i downloaded busybox-1.1.0,unzip,

patch -p1 <~/download/busybox-110.diff

hank success.

make menuconfig

make

but

nios2-linux-uclibc-flthdr <~/download/busybox-1.1.0/busybox

I get an error message :

QUOTE

Cannot read header of ~/download/busybox-1.1.0/busybox

help.

I meet a pb ,when patch the busybox

[root@nios busybox-1.1.0]# patch -p1 <~/download/busybox-110.diff

patching file Makefile

Hunk# 1 FAILED at 213.

1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej

--- Quote Start ---

originally posted by hippo@Feb 6 2006, 09:17 AM

hi cetic,

2. missing elf2flt for busybox, download attached busybox_110.zip

add the elf2flt stuf to busybox makefile

cd ~/download
unzip busybox_110.zip
cd ~/buildroot/build_nios2/busybox-1.1.0
patch -p1 <~/download/busybox-110.diff
rm busybox
make
cd ~/buildroot
make

check again with flthdr.

then rebuild kernel.

or you may try post#4, to rebuild toolchain.

hippo

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=12566)</div>

--- Quote End ---

Hi hippo,there is a pb:

[root@nios download]# cd ~/linux-2.6.16.1

[root@nios linux-2.6.16.1]# make ARCH=nios2nommu CROSS_COMPILE=nios2-linux-uclibc- hwselect SYSPTF=std_1c20.ptf

Makefile:524: /root/linux-2.6.16.1/arch/nios2nommu/Makefile: &#27809;&#26377;&#37027;&#20010;&#25991;&#20214;&#25110;&#30446;&#24405;

make: *** &#27809;&#26377;&#35268;&#21017;&#21487;&#20197;&#21019;&#24314;&#30446;&#26631;“/root/linux-2.6.16.1/arch/nios2nommu/Makefile”&#12290; &#20572;&#27490;&#12290;

[root@nios linux-2.6.x]# ls /root/linux-2.6.16.1/arch/

alpha cris i386 m68k parisc s390 sparc v850

arm frv ia64 m68knommu powerpc sh sparc64 x86_64

arm26 h8300 m32r mips ppc sh64 um xtensa

there is no "nios2nommu" in that dir

Hi Alex,

The ccache path is correct now in build0322.zip . And it is disabled by default.