Forum Discussion

GerhardCadek's avatar
GerhardCadek
Icon for Occasional Contributor rankOccasional Contributor
2 months ago

Arria 10SX current drawn during non-volatile key programming

Hi, we are using in our design an Arria10 SX (precisely the 10AS027E4F29E3SG) device. The design had been successfully manufactured for approx. 100 units. For one customer we decided to use design s...
Power
Security
GerhardCadek's avatar
GerhardCadek
Icon for Occasional Contributor rankOccasional Contributor
2 months ago

Hi,

I am sorry but you did not get the point. While the current consumption of the regular design depends on the amount of logic we are using I am solely interested in the current required for programming the non-volatile fuse of the Arria 10 SX FPGA. This current adds on top of all other currents drawn by our logic. This current is not specified at all. The PDN tool is thus useless for this task. Please provided this information.

Thank you

Gerhard

  • Farabi_Altera's avatar
    Farabi_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 months ago

    status : checking with validation team.