arria-10-gx dev ttack won't install on x86_64

We have not heard from you and I hope that my last note clears up this matter. I will now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

Based on my understanding, Alternative you could apply an Intel 90-Day Evaluation License use with Quartus Pro/Standard. Login to Intel® FPGA Self Service Licensing Center and request the Quartus evaluation free license here https://licensing.intel.com/

1) Go to Sign up for Evaluation or Free licenses

2) Select Intel® FPGA EVALUATION-LIC

3) # of Seats is always 1

4) Check the T&C box

5) Add the required options

6) Click Get License button

The license will be sent to email that you register with

Hi

Arria 10 device is supported in Quartus Prime Pro and Standard Edition Software. Refer here

https://www.intel.com/content/dam/www/central-libraries/us/en/documents/quartus-prime-compare-editions-guide.pdf

this package won't work with aria 10 PAC, will it?

Quartus Prime Lite Edition (Free)  - Devices [Y/n] :y

Quartus Prime Lite Edition (Free)  - Devices - Arria II (536.5MB) [Y/n] :y

Quartus Prime Lite Edition (Free)  - Devices - Cyclone IV (516.3MB) [y/N] : y

Quartus Prime Lite Edition (Free)  - Devices - Cyclone 10 LP (293.5MB) [y/N] : y

Quartus Prime Lite Edition (Free)  - Devices - Cyclone V (1430.9MB) [y/N] : y

Quartus Prime Lite Edition (Free)  - Devices - MAX II/V (13.1MB) [y/N] : y

Quartus Prime Lite Edition (Free)  - Devices - MAX 10 FPGA (355.1MB) [y/N] : y

@AR_A_Intel At another thread Intel representative pointed out that PAC acceleration stack installer is not supposed to wirk for driver installation; instead the've sent me to instructions from opae website which resulted in nothing but this

https://www.intel.com/content/www/us/en/products/details/fpga/platforms/pac/arria-10-gx.html

May we know, is this the board you refer to:

https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/arria/10-gx-signal-integrity.html

trying with this card

https://www.ebay.com/itm/144384215700?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=jrRUcC3ATtO&sssrc=2349624&ssuid=NotikyrLQ9-&var=&widget_ver=artemis&media=COPY

what is the correct software for hello world or simple diagnostics?

so far I am interested to confirm that the card just works e.g. with the most tiniest hello world example or another diagnostic test if possible

any directions here? I was looking previously in

https://www.intel.com/content/www/us/en/docs/programmable/683633/1-2-1/running-the-hello-fpga-example.html

with https://www.intel.com/content/www/us/en/software-kit/665840/intel-pac-with-intel-arria-10-gx-fpga-acceleration-stack-version-1-2-1.html

but it would say PAC not detected on ubuntu 18/20

on executing

sudo fpgasupdate $OPAE_PLATFORM_ROOT/hw/samples/nlb_mode_0/bin/\
nlb_mode_0_unsigned.gbs

despite showing lspci outputs

Hello

Welcome to INTEL forum. Based on my understanding. ubuntu version is not an officially support OS for Devkit. An unsupported platform means that some things may work, but others not, and we won't put any resources into debugging or diagnosing. We recommended to use Windows as it was tested before. Arria 10 GX tested with Quartus v15.1 and Operating system support

------------------------

* Windows 7 SP1(64 bit)

* Windows 8.1 (64 bit)*

* Windows Server 2008 R2 SP1 (64 bit)**

* Red Hat Enterprise Linux 5.10 (64 bit)***

* Red Hat Enterprise Linux 6.5 (64 bit)

For more details refer the below link at Quartus 15.1 readme.txt

https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-software/os-support.html?wapkw=operating%20system%20support