Occasional Contributorcould you advise which exactly OS to install on x86_64 in order for intel dev stack script to work correctly, please? Tried with ubuntu 18,20 with various kernel versions 5.4, 5.8 - it won't work
What OS is supported?
Occasional ContributorI am reinstalling the OS using
wget https://releases.ubuntu.com/18.04/ubuntu-18.04.6-desktop-amd64.iso
but it [intel setup script] won't work on fresh installed 18.04 from the iso, will it?
Occasional Contributorit did not work
~/a10_gx_pac_ias_1_2_1_pv_dev_installer$ ./setup.sh but it already failed add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area... make -j4 KERNELRELEASE=5.4.0-84-generic KERNELDIR=/lib/modules/5.4.0-84-generic/build.....(bad exit status: 2) Error! Bad return status for module build on kernel: 5.4.0-84-generic (x86_64) Consult /var/lib/dkms/intel-fpga/2.0.3/build/make.log for more information. Kernel preparation unnecessary for this kernel. Skipping...
Occasional Contributorlspci -s 07:00.0 -vv 07:00.0 Processing accelerators: Intel Corporation Device 09c4 Subsystem: Intel Corporation Device 0000 Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at 80600000 (64-bit, prefetchable) [size=512K] Region 2: Memory at 80680000 (64-bit, prefetchable) [size=512K] Capabilities: <access denied> Kernel driver in use: dfl-pci Kernel modules: dfl_pci
Super ContributorHello
Welcome to INTEL forum. Based on my understanding. ubuntu version is not an officially support OS for Devkit. An unsupported platform means that some things may work, but others not, and we won't put any resources into debugging or diagnosing. We recommended to use Windows as it was tested before. Arria 10 GX tested with Quartus v15.1 and Operating system support
------------------------
* Windows 7 SP1(64 bit)
* Windows 8.1 (64 bit)*
* Windows Server 2008 R2 SP1 (64 bit)**
* Red Hat Enterprise Linux 5.10 (64 bit)***
* Red Hat Enterprise Linux 6.5 (64 bit)
For more details refer the below link at Quartus 15.1 readme.txt
Occasional ContributorHow do I run the hello world example on Quartus?
Is it [Quartus]free to try with or requires a separate license? In my interface whichever version I select to download the website says it is not available
:
Occasional Contributorso far I am interested to confirm that the card just works e.g. with the most tiniest hello world example or another diagnostic test if possible
any directions here? I was looking previously in
but it would say PAC not detected on ubuntu 18/20
on executing
sudo fpgasupdate $OPAE_PLATFORM_ROOT/hw/samples/nlb_mode_0/bin/\ nlb_mode_0_unsigned.gbs
despite showing lspci outputs
Occasional Contributortrying with this card
what is the correct software for hello world or simple diagnostics?
Super ContributorMay we know, is this the board you refer to:
Occasional ContributorNo, The board is this
Occasional Contributor@AR_A_Intel At another thread Intel representative pointed out that PAC acceleration stack installer is not supposed to wirk for driver installation; instead the've sent me to instructions from opae website which resulted in nothing but this
Occasional Contributorthis package won't work with aria 10 PAC, will it?
Quartus Prime Lite Edition (Free) - Devices [Y/n] :y Quartus Prime Lite Edition (Free) - Devices - Arria II (536.5MB) [Y/n] :y Quartus Prime Lite Edition (Free) - Devices - Cyclone IV (516.3MB) [y/N] : y Quartus Prime Lite Edition (Free) - Devices - Cyclone 10 LP (293.5MB) [y/N] : y Quartus Prime Lite Edition (Free) - Devices - Cyclone V (1430.9MB) [y/N] : y Quartus Prime Lite Edition (Free) - Devices - MAX II/V (13.1MB) [y/N] : y Quartus Prime Lite Edition (Free) - Devices - MAX 10 FPGA (355.1MB) [y/N] : y
