AGFB014R24B2E2EV : Evaluation board not booting with NAND Daughter card

Hi,

I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.

p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.

Hi,

Thanks for the update, can you also open a new thread regarding the Linux customization for NAND. Thanks.

Hi,

So for this issue, do you confirm everything is now working with the NAND daughter card and boot is fine, when NAND is set to active?

If there are no other questions related to the NAND daughter cards, we shall set the thread to close.

Hi,

Got it glad it worked out, as this thread was opened for NAND daughter card booting, are you fine with opening a new thread for the eMMC booting?

I will help you on the issue on the new thread to keep track of the new issue there.

p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.

Hi,

Do you have update on my previous comment regarding the testing?

Hi,

Can you test the following, set any following environment/version to as per your own environment:

Set the daughter card to NAND.

Grab the following files from https://releases.rocketboards.org/2022.07/nand/agilex_nand/ :

1. ghrd_agfb014r24b2e2v.sof
2. u-boot-spl-dtb.hex

Building QSPI Flash Image

• https://www.rocketboards.org/foswiki/Documentation/AgilexSoCGSRD#Building_QSPI_Flash_Image_AN1

Write QSPI Image:

1. Power off board

2. Set MSEL to JTAG

3. Power on board

4. Write jic image to QSPI:

• https://www.rocketboards.org/foswiki/Documentation/AgilexSoCGSRD#Write_NAND_Binaries

Booting Linux

1. Set MSEL to QSPI

2. Power cycle the board

If there are still no prints after the above test, I will proceed your issue to our RMA team.

Hi,

We might proceed with RMA for your daughter card, but before we proceed, I am checking 1 more test with our internal team before proceeding.

Please wait while I confirm the test, we apologies for your any inconvenience for your out of box experience with our FPGA device.

Hi,

My apologies for the late respond, I did not have computer access for few days.

BTW, do you have additional board for test? You may swap the daughter card in between the boards to identify if the broken board's daughter card is not working.

Hi,

Could you have a quick check on the MSEL pin to JTAG and the flow in my previous comments?

Hi,

Based on your request to do eMMC flash, the MSEL is to be set to JTAG:

https://www.rocketboards.org/foswiki/Projects/AgilexSoCWithEMMCStorageOnHPS#Writing_the_eMMC_Image

The full boot flow is like this:

https://www.rocketboards.org/foswiki/Projects/AgilexSoCWithEMMCStorageOnHPS

So I assume you have corrected the pins as below:

https://www.rocketboards.org/foswiki/Projects/AgilexSoCWithEMMCStorageOnHPS#NAND_47eMMC_Daughtercard