Forum Discussion

MK_086's avatar
MK_086
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

AGFB014R24B2E2EV : Evaluation board not booting with NAND Daughter card

Dear Experts, We have received the new AGFB014R24B2E2EV Eval board, when we powered on the board the HPS Linux booting observed on UART, when Out of box experience daughter card plugged in . When ...
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi,


Can you test the following, set any following environment/version to as per your own environment:


Set the daughter card to NAND.


Grab the following files from https://releases.rocketboards.org/2022.07/nand/agilex_nand/ :

  1. ghrd_agfb014r24b2e2v.sof
  2. u-boot-spl-dtb.hex


Building QSPI Flash Image


Write QSPI Image:

1. Power off board

2. Set MSEL to JTAG

3. Power on board

4. Write jic image to QSPI:


Booting Linux

1. Set MSEL to QSPI

2. Power cycle the board


If there are still no prints after the above test, I will proceed your issue to our RMA team.