Forum Discussion
Occasional ContributorOneAPI Support for Agilex 5 and 7 Development Kits
Hello,
I've recently acquired an Agilex 5 065B Modular development kit (https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/agilex/a5e065b-modular.html) and an Agilex 7 I-Series development kit (https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/agilex/agi027.html).
I've been working through setting up the development environments for these boards, and would like to use the oneAPI HLS toolkit for them, if possible. So far, I've found a tutorial to create an accelerator support package for the Agilex 7 development kit that I have (https://ofs.github.io/ofs-2024.3-1/hw/common/user_guides/oneapi_asp/ug_oneapi_asp/). I'm planning to go through these steps shortly to setup my board for use with oneAPI, but I have yet to find any documentation for my Agilex 5 board. Is it possible to work with this Agilex 5 development kit using oneAPI, or is only the Quartus design flow supported at this time? Additionally, are there board support packages available (that I've just missed) - or soon to be available - for these cards if the HLS flow is an option?
Thank you!
5 Replies
BoonBengT_AlteraModerator
Hi @jjb169,
With no further clarification on this thread, it will be transitioned to community support for further help on doubts in this thread.
Please login to ‘ https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.
Thank you for the questions and as always pleasure having you here.
Best Wishes
BB
jjb169Hi @BoonBengT_Altera ,
I just wanted to let you know that the issue I'm experiencing now has been posted within a different forum thread earlier this year, but did not reach a resolution. Here is a link to that forum, and any additional help you could provide to guide us to a fix would be greatly appreciated!
OneAPI for Agilex 7 I-Series Dev Kit: aocl diagnose acl0 and board_test sample fail
Thank you!
- BoonBengT_Altera
Hi @jjb169,,
Good to know that you doubts is clarified.
Noted on the challenges in the Agilex7 with OFS BSP building.
Yes you can create a new post with the details such as device used, links referred and error faced in the below community forum and we would get back as soon as we can.
https://community.intel.com/t5/Intel-High-Level-Design/bd-p/high-level-design
Best Wishes
BB
- BoonBengT_Altera
Hi @jjb169,
Thank you for posting in Intel community forum, hope all is well and apologies for the delayed in response.
Noted on the dev kit mention, and yes unfortunately for the Agilex5 the current available build flow are for quartus design. (More details on the quartus compilation can be found in the link here : https://www.intel.com/content/www/us/en/docs/oneapi/programming-guide/2025-1/fpga-flow.html)
For the mention BSP pretty much you have mention them, more details/add in BSP you can monitor in the website below :
- https://www.intel.com/content/www/us/en/developer/tools/oneapi/fpga.html (please scroll to the 'Choose an FPGA Platform' section)
Hope that clarify
Best Wishes
BB
- jjb169
Hello @BoonBengT_Altera ,
Thank you for the clarification!
I've been working through building a BSP for my Agilex 7 board per the OFS instructions, but I've been running into a strange error when trying to build an example project with the BSP now. Would you happen to know where I could report my issues and get some help fixing them? Would a new post in this forum work, or would another location be better?
Thank you!
