Forum Discussion

Ali8's avatar
Ali8
Icon for New Contributor rankNew Contributor
2 years ago
Solved

OneAPI and FPGA SoCs

With the Intel FPGA SDK for OpenCL, it is possible to target FPGA SoCs with board support packages (host code on the Arm hard processor and kernel on FPGA fabric). Is this something that is going to be supported with OneAPI/Sycl in the near future?

High-level Design Tools

2 Replies

  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    Icon for Moderator rankModerator
    2 years ago

    Hi @Ali8,


    Thank you for posting in Intel community forum on your interest on the Intel OneAPI toolkit and hope all is well.

    Apologies but we are unable to provide the clear timeline here, but in the near future you can expect the similar build flow would be avaialble.


    For now the only support device for intel OneAPI are as followed in below:

    - https://www.intel.com/content/www/us/en/developer/tools/oneapi/fpga.html (For non PAC product, please scroll to the 'Choose an FPGA Platform' section)

    - https://www.intel.com/content/www/us/en/docs/oneapi/programming-guide/2023-1/fpga-bsps-and-boards.html (For PAC product)


    Hope that clarify.


    Best Wishes

    BB


  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    Icon for Moderator rankModerator
    2 years ago

    Hi @Ali8,


    Noted with thanks on the response, with no further clarification on this thread, it will be transitioned to community support for further help on doubts in this thread. Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support.

    Thank you for the questions and as always pleasure having you here.


    Best Wishes

    BB


    p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.