New Contributor
ContributorHi Essen,
Have you reviewed the Arria 10 Golden System Reference Design:
https://altera-fpga.github.io/rel-26.1/embedded-designs/arria-10/sx/soc/gsrd/ug-gsrd-a10sx-soc/
Sue
New ContributorYes, I referred to that documentation. I believe my HPS configuration for enabling UART0 is correct, but I'm not sure what the next steps are on the software side.
As I mentioned earlier, I have the SoC EDS Command Shell and the Linaro Bare-Metal Toolchain available. Could you share any reference projects, tutorials, application notes, or videos that explain the complete workflow?
Specifically, I would like to understand:
1.How to create a simple bare-metal C application that uses UART0 to transmit a "Hello World" message.
2.How to build/compile the application using the Linaro toolchain.
3.How to generate the required boot files/images.
4.How to load and run the application on the target device.
Any debugging methods to verify UART0 output.
And the main important thing i wants do all these things in windows (baremetal approach), not using linux.
so please provide me any video or detailed example which would be helpful.
Regards
Team D&D, ESSEN
