Forum Discussion

wang5's avatar
wang5
Icon for New Contributor rankNew Contributor
2 years ago

E-tile模块与QSPFDD 400G光模块的连接

Agilex E-tile模块能否使用QSPFDD 400G光模块进行数据传输？如果可以的话，有没有相应的Demo进行参考。
Hps Arch
ZiYing_Intel's avatar
ZiYing_Intel
Icon for Frequent Contributor rankFrequent Contributor
2 years ago

Hi wang5,

Intel Agilex® 7 FPGA F-Series Development Kit has 2x Standard QSFPDD supports both optical and electrical cable interfaces. So you can use the optical module to transfer the data.

Currently we don't have the demo about Agilex E-tile and QSFPDD 400G in our FPGA design store.

For further information, you may refer to website below:

  1. https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-examples/design-store.html
  2. https://www.rocketboards.org/foswiki/Main/WebHome

Best regards,

zying


wang5's avatar
wang5
Icon for New Contributor rankNew Contributor
2 years ago

您的意思是说，我这个开发板上的E-tile模块可以使用QSFPDD 400G光模块传输是吗？但我在使用 Agile E-tile Transceiver Native PHY IP进行外部回环测试时，接收端一直没有接收到数据。是我哪里配置有问题还是这个开发板上的E-tile模块不可以使用QSFPDD 400G光模块传输？