Forum Discussion
PJdesigns
New Contributor
New ContributorSimulation using Questa-Intel FPGA Edition with Quartus Prime Lite 23.1 and VWF file
Re-design of old schematic based design, (1994) and need to update to MAX V family CPLD. Trying to run the simulator on design using VWF file with an error generated, (see attached).
You can find it the "Simulation Waveform Editor " GUI.
Regards,
Richard Tan
RichardT_altera
Super Contributor
Super Contributor-novopt has been deprecated and you will need to remove it.
Go to Simulation > Simulation Setting, and remove the -novopt in the script.
Regards,
Richard Tan
