Forum Discussion

kikoss's avatar
kikoss
Icon for Occasional Contributor rankOccasional Contributor
2 years ago
Solved

set operating condition agilex7

Hello i have a project with the following agilex7 part AGIB027R31B1E1V on the timing report i have the following possibilities "1_slow_vid1_100c" "1_slow_vid1b_100c" "MIN_fast_vid1_100c" "MIN_fast...
Timing
  • RichardT_altera's avatar
    RichardT_altera
    2 years ago

    Why do you want to set the temp to 85C? If the timing passed in 100C, then it will also pass in 85C as 100C is the worst case as compared to 85C.

    Unfortunately, there is no known way to set the temperature to other invalid value.

    When running set_operating_conditions, you must only specify valid operating conditions for the current device. Run the get_available_operating_conditions command to return a list of all valid operating conditions for the current device.

    Reference:

    https://www.intel.com/content/www/us/en/docs/programmable/683243/24-1/setting-the-operating-conditions-for.html


    Regards,

    Richard Tan


RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
2 years ago

Thank you for acknowledging the solution provided. I'm pleased to know that your question has been addressed.


Now, I will transition this thread to community support. If you have any further questions or concerns, please don't hesitate to reach out.

Thank you and have a great day!


Best Regards,

Richard Tan


p/s: If you find any answers from the community or Intel Support to be helpful, we encourage you to mark them as the best answer or rate them 4/5 in the survey.