Forum Discussion

VKap01's avatar
VKap01
Icon for New Contributor rankNew Contributor
5 years ago

qspi activ serial quad controller cyclone V

Hello. how can i use two quad spi controllers for two identical flash memories (mt25ql02g), if one is connected for use in active serial mode, and the other for direct access (storing my data). When...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi Vkap,


Apologize that it cannot be. You can only use 1 QSPI flash and a QSPI flash IP. I would suggest you to choose bigger QSPI flash, then, include a serial flash IP in your design. You may refer to link below for more information about the serial flash IP

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an370.pdf


With the IP, you can interact with the flash memory during user mode. However, you may want to avoid the memory addresses which you bitstream is stored in.


Thank You.