Forum Discussion

GBraj's avatar
GBraj
Icon for New Contributor rankNew Contributor
6 years ago

Prime Pro 19.1 and 19.4 -- IP Catalog -- Invoking "Fixed Point Functions Intel FPGA IP", entering a name and clicking OK crashes.

I am targeting an Arria 10 device, I want to use the adder and the square root. After launching the IP and entering the name for saving, the application disappears. No warning or message. Tried on t...
GBraj's avatar
GBraj
Icon for New Contributor rankNew Contributor
6 years ago

Just tried on 19.3. No luck, same behaviour. No files (.rpt or anything else) generated.

The only messages that I can see are reported below:

Info(112000): Started d:/intelfpga_pro/19.3/quartus//sopc_builder/bin/ip-catalog.exe (3940)

Info(112000): d:/intelfpga_pro/19.3/quartus//sopc_builder/bin/ip-catalog.exe (3940) terminated normally

Info(112000): Started d:/intelfpga_pro/19.3/quartus/../qsys/bin/qsys-edit.exe (1804)

Info(112000): d:/intelfpga_pro/19.3/quartus/../qsys/bin/qsys-edit.exe (1804) terminated normally