No reports generated and can't assign pins in Quartus II

Can anyone help ?

What do I have to do to get some assistance here ?

Hi,

You may want to give us more details. What do you mean by you cannot see any reports. Are you compiling using the GUI? Didn't the report windows show up automatically? Which version are you using? Maybe you can attach a screen shot.

For location assignments, you can go to the Assignment Editor or the Pin Planner. Again, your question is unclear, so you need to give us details if you want more help.

DK

OK this is what I have done.

I have downloaded and installed the latest Quartus V10.0 SP1 Web Edition.

I have created a project in Quartus using an AHDL file that compiles successfully under MAX PLUS.

Then I start a compilation ie Processing -> Start Compilation and then says "full compilation was successful". See the screen grab below.

Hi,

Sorry but there is no additional detail in your reply. What are you doing in Quartus? Are you compiling in command-line, using the GUI. How are you creating the project (maybe you can attach the QSF file). Quartus will give you an error if there is something wrong. What's the error? And you still have not giving us the Version. By SP1, do you mean V10.0sp1?

Once you give us details, I am sure somebody will be able to help you.

-David

Yes it is V10.0sp1

The other thing that is not clear from the screen grab is the message box which says the following.

Info: You have a valid up-to-date license
Info: You have a valid up-to-date license
Info: You have a valid up-to-date license
Info: You have a valid up-to-date license
Info: Quartus II Full Compilation was successful. 0 errors, 0 warnings

Also the Compilation report says "data not available"

Ok, this is very unusual.

Can you try exiting Quartus and going to the command-line console (Windows CMD), and trying from the comman-line:

quartus_map <your project name> (The project name should be the name of the QSF file)

Did quartus_map generate a <project name>.map.rpt file? Did it generate a "db" directory? What's in the "db" directory?

Can you confirm you have enough disk space and that your directory is writable?

-DK

And the link is

http://alteraforums.com/forum/showthread.php?p=101323

--- Quote Start ---

Ok, this is very unusual.

Can you try exiting Quartus and going to the command-line console (Windows CMD), and trying from the comman-line:

quartus_map <your project name> (The project name should be the name of the QSF file)

Did quartus_map generate a <project name>.map.rpt file? Did it generate a "db" directory? What's in the "db" directory?

Can you confirm you have enough disk space and that your directory is writable?

-DK

--- Quote End ---

Yes I did that and it comes back with the following in green text

"Info: You have a valid up_to_date license"

There is no rpt file either and the db directory was already there.

Maybe I should reinstall it ?