Forum Discussion

KHill's avatar
KHill
Icon for New Contributor rankNew Contributor
6 years ago

I'd like to use a JTAG UART with an 8-bit processor that I'm using with the terasic DE0-CV board that I have. I do have a conventional UART that I could use, but I'd prefer to use the JTAG cable. Performance would be modest, in area of 9600 bps or slower.

Simple communications through a terminal for character communications would be fine.
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
6 years ago

HI Krista,

Yes, the JTAG server will be installed during Quartus installation. To communicate with any system using Putty and etc, you will need to initiate an IP in Quartus called "JTAG to Avalon Master Bridge".