Forum Discussion

liron's avatar
liron
Icon for New Contributor rankNew Contributor
5 years ago

hps error after update to quartus 19.4

Hi, My design work well on quartus 17.1, after updating to quartus 19.4 the compilation fail on the plan step and i got this error on hps_uart_rx pin F20: Error (14566): The Fitter cannot place 1...
sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
5 years ago

Which SoC device are you targeting? Do you have a pin assignment in the Pin Planner to pin F20?

#iwork4intel

  • liron's avatar
    liron
    Icon for New Contributor rankNew Contributor
    5 years ago

    The device is arria 10 10AS066H2F34I2SG and i have a pin assignment in the Pin Planner to pin F20.

    This project pass compilation in quartus 17.1.

    • AnilErinch_A_Intel's avatar
      AnilErinch_A_Intel
      Icon for Frequent Contributor rankFrequent Contributor
      5 years ago

      Hi

      Since there are lot of difference between 17.1 version of Quartus and 19.4 version , can you check with an intermediate version like 18.1 to see that the issue still exists.

      Thanks and Regards

      Anil