Forum Discussion

SayaliMore's avatar
SayaliMore
Icon for New Contributor rankNew Contributor
5 years ago

Flashing the CPLD using USB Blaster throws error(209015)

Initially I flashed the CPLD - MAX V 5M1270Z using USB Blaster and Quartus prime it was successful Then, I was trying to reprogram CPLD using JTAG - JAM STAPL interface, where it gave me error code...
ShubhamK's avatar
ShubhamK
Icon for New Contributor rankNew Contributor
5 years ago

VCCIO voltage is 3.3V & VCCINT voltage is 1.8V

These are regulated voltages and generated from power rails.

ShubhamK's avatar
ShubhamK
Icon for New Contributor rankNew Contributor
5 years ago

Is there any way to make sure if device is damaged ? Like device could draw more current draw, something like that