Forum Discussion

SayaliMore's avatar
SayaliMore
Icon for New Contributor rankNew Contributor
5 years ago

Flashing the CPLD using USB Blaster throws error(209015)

Initially I flashed the CPLD - MAX V 5M1270Z using USB Blaster and Quartus prime it was successful Then, I was trying to reprogram CPLD using JTAG - JAM STAPL interface, where it gave me error code...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Have you tried power cycle the board and reconnect the blaster to see if the issue is still observed?


  • SayaliMore's avatar
    SayaliMore
    Icon for New Contributor rankNew Contributor
    5 years ago

    Yes, I tried with the power cycle and even reconnecting the blaster multiple times,

    Sometimes the error code 35 was observed but then after restarting the PC again shows the same error code (209015)