Forum Discussion

AK225's avatar
AK225
Icon for New Contributor rankNew Contributor
2 years ago

Error: Can't launch Questa Intel FPGA Simulation software.

Hi, I'm unable to launch a simulation for a project and I keep getting the following error: I'm using Quartus Prime Lite Edition 21.1 with a generated free license from Intel "Questa*-Intel® ...
Installation & Licensing
SyafieqS's avatar
SyafieqS
Icon for Super Contributor rankSuper Contributor
2 years ago

Hi Andrew,


Did you able to resolve this or still need some help?

Anyway, have you tried on diff machine?

Is it possible to use latest std edition? (i think 22.1)


AK225's avatar
AK225
Icon for New Contributor rankNew Contributor
2 years ago

Hi,

This issue is still unresolved, assistance would be appreciated.

Unfortunately this is the only machine i'm able to test this on, however other students have been able to get theirs working when following the same steps taken.

I've been instructed to use 21.1 as thats the version a lot of the lab sheets are based around, but if the differences are minimal it could be worth a try.

I'm able to provide a copy of the instructions followed for installation so you can see what steps were taken and where things might have gone wrong.

Many thanks,

Andrew.