Forum Discussion

AWann1's avatar
AWann1
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Cyclone III - Flash Loader IP not loaded

Hello all. I am trying to program a Cyclone III LS with a new .jic file. I made modifications to the code and compiled it in Quartus 13. However, these boards were built relatively recently an...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
3 years ago

It is possible to share me the screenshot of your programmer? meanwhile can you try to reduce the TCK frequency of USB Blaster II to 6MHz?


AWann1's avatar
AWann1
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

I am using a USB Blaster, Rev C, I think it's only TCK frequency is 6MHz

Attached is the Programmer screenshot.

I did an experiment:

I found that we had some old EPCS64SI16N memory in our inventory. I removed the EPCQ memory, and put the EPCS in its place. I remade the programming file to work for that memory. But I still get the same error: Flash Loader IP not loaded on device 1