Forum Discussion

aiedb's avatar
aiedb
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

simple socket sever-max 10 neek

hii i have the max 10 neek dev board and i would like to run the socket-server in the demonstration folder - the dev board comes with a cd which has all types of examples i followed the...
ShengN_altera's avatar
ShengN_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

Hi @aiedb ,

May be you can follow this video posted before https://www.youtube.com/watch?v=CAY2NSB0XEw. After programming .sof file, go to eclipse KEPLER -> right-click -> Run As -> Nios II Hardware -> Download details shown in Nios II Console

The Nios II Hardware settings can refer to this document https://www.intel.com/content/dam/support/us/en/programmable/support-resources/fpga-wiki/asset03/simple-socket-ethernet-neek.pdf (page 11):

  • Load the executable to the processor by right clicking on the Application project and selecting Run-As Nios II Hardware.
  • In the Run Configurations page under the Target connections tab. Check the options; Ignore mismatched system ID and Ignore mismatched system timestamp. If you don’t see the connection specified, click Refresh Connections. Click Apply followed by Run.

Thanks,

Best regards,

Sheng

p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.