Forum Discussion

XleraSolutions's avatar
XleraSolutions
Icon for New Contributor rankNew Contributor
2 years ago

Nios-V with FreeRTOS

Hi All, I have an existing design using Nios-V with FreeRTOS, built on Q23.4. I updated to Q24.1 and all of the drivers for altera/intel components (TSE, mSGDMA, SPI, etc) do not get included in the...
Nios Cpu
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi


Since this thread been resolve, I shall set this thread to close pending. If you still need further assistance, you are welcome to reopen this thread within 20days or open a new thread, some one will be right with you. Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.


If you happened to close this thread you might receive a survey. If you think you would rank your support experience less than 4 out of 10, please allow me to correct it before closing or if the problem can’t be corrected, please let me know the cause so that I may improve your future service experience.


Regards

Jingyang, Teh


agieson_cl's avatar
agieson_cl
Icon for New Contributor rankNew Contributor
1 year ago

Hi! I'm experiencing the same issues described in this post in the new Quartus Standard 24.1 (released 3/17/25). I wanted to check in to see if there was any fix or workaround to the drivers not populating in the BSP when updating a design to freeRTOS in the newest version of quartus standard. Thank you!