Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

TSE Simple Socket with epcs

Hi all, I'am starting a new design based on c4gx board. I would like to use the TSE IP for ethernet communication. So I want to start with SSS project. My question is can I design my cust...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

you will still need sram or dram, but the cfi flash is not required. the portion of code that reads the mac address from the flash is in your application, the default function reads from cfi flash but you can edit it to do whatever you like.