Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

TSE_MAC interfacing with Marvell 88E6185 switch

Hi, I am using Altera TSE_MAC to interface Marvell 88E6185 through GMII. I can not get any communication going. I have changed tse's driver but the TSE_MAC command configuration register's soft...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

IIRC the soft_reset bit isn't cleared by the PHY, but by the TSE itself. Usually when it doesn't reset by itself, it means it isn't receiving one of the clocks on the GMII. Check that the TSE is receiving valid tx and rx clocks.