Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

TSE IP issue when downloading software application on NIOSII

Hi, I have a Stratix3 DSP development Kit based on EP3SL150F1152C2N FPGA. I use the Triple Speed Ethernet MegaCore ( 10/100/1000Mb Ethernet MAC with 1000 base-X/SGMII PCS). When I load the des...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

It is strange because is use this design without any modification. I download the .sof and .ptf and I have the same issue whereas in the past I have no problem with it.

For information, when I open the sopc builder and I open the TSE megacore already use in the SOPC system, the TSE is configured with 10/100/1000Mb Ethernet MAC with 1000 Base-X/SGMII PCS.

The standard design I used is dated from the 07/2009 ( is that help ? ).