Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

TSE by Using System Console on DE2-115

Hi, I'm trying to test on a DE2-115 Terasic board, the TSE reference designs available on AlteraWiki: by using system console, for RGMII or MII interfaces, in Forward loopback mode. Desi...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Hi,

the reference design can be found here on Altera web site. I'm still unable to post a link at this time, so please go the "Literature page", then choose the "Application Notes" link. It is the first application note, referenced AN647.

I used the design targetted for Arria II and I modified it in order to use it on a Cyclone IVE (the one on the Terasic board). Please find attached my design.

The design seems to work when including a signal tap module, but it is still stucked without this signal tap module. So, I am almost sure that it is about a problem of timing.