Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Stratix V PCIe HIP not supporting Avalon MM Gen3 x8 I/F

Can anyone say why ? I have a single EP design using Avalon MM interconnect and across Cyclone IV, Arria V and Stratix V and I want to support Gen3 X1, X4 and X8 on the Stratix V card ... Th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

I assume your previous question is below:

"I have compiled it as a TOP (with success) and programmed the final sof to a Stratix V PCIe Gen3x8 based board, but I could not get the thing to work (not even "lspci" could recognize the board at start up)."

The Gen3_x8_AVMM_256-bit_DMA_for_External_DDR3_-_Stratix_V example design had been tested, it should works out of the box.